Wsm 05-E2B SERIES Especificaciones descargar pdf (Pagina 93)

S-40

03-E2B SERIES, WSM

DIESEL ENGINE

(5) Piston and Connecting Rod

Oil Pan and Oil Strainer

1. Remove the oil pan mounting screws.

2. Remove the oil pan (3) by lightly tapping the rim of the pan with

a wooden hammer.

3. Remove the oil pan gasket (2).

4. Remove the oil strainer (1) and O-ring (4).

(When reassembling)

• After cleaning the oil strainer (1), check to see that the filter mesh

in clean, and install it.

• Visually check the O-ring (4), apply engine oil, and install it.

• Securely fit the O-ring (4) to the oil strainer (1).

• Apply a liquid gasket (Three Bond 1215 or equivalent) to the oil

pan side of the oil pan gasket (2).

• To avoid uneven tightening, tighten oil pan mounting screws in

diagonal order from the center.

W1025687

(1) Oil Strainer

(2) Oil Pan Gasket

(3) Oil Pan

(4) O-ring

KiSC issued 05, 2008 A

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 124 125

Sin comentarios

Wsm 05-E2B SERIES Especificaciones Pagina 93