Wsm 05-E2B SERIES Especificaciones descargar pdf (Pagina 21)

G-9

03-E2B SERIES, WSM

G GENERAL

Replacing Oil Filter Cartridge

CAUTION

• Be sure to stop the engine before replacing filter cartridge.

1. Remove the oil filter cartridge (1) with the filter wrench.

2. Apply a slight coat of oil onto the new cartridge gasket.

3. To install the new cartridge, screw it in by hand. Over tightening

may cause deformation of rubber gasket.

4. After the new cartridge has been replaced, the engine oil

normally decrease a little. Thus see that the engine oil does not

leak through the seal and be sure to read the oil level on the

dipstick. Then, replenish the engine oil up to the specified level.

IMPORTANTQ

• To prevent serious damage to the engine, replacement

element must be highly efficient. Use only a KUBOTA

genuine filter or its equivalent.

W1013487

(1) Engine Oil Filter Cartridge

KiSC issued 05, 2008 A

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 124 125

Sin comentarios

Wsm 05-E2B SERIES Especificaciones Pagina 21