Wsm 05-E2B SERIES Especificaciones descargar pdf (Pagina 90)

ENGINE

SM-E4B SERIES, WSM

1-S26

Magnet Switch Continuity Test

1. Check the continuity across the C terminal (1) and the B

terminal (2) with a circuit tester, pushing in the plunger.

2. If not continuous or if a certain value is indicated, replace the

magnet switch.

9Y1210785ENS0018US0

No-load Dynamo Output

1. Disconnect the lead wires from the dynamo.

2. Start the engine and operate the dynamo at the specified speed.

3. Measure the output voltage with a volt meter.

If the measurement is not within the specified values, replace

the dynamo.

9Y1210785ENS0019US0

(1) C Terminal

(2) B Terminal

[A] Electromagnetic Drive Type

[B] Planetary Gear Reduction Type

No-load output voltage Factory specification

AC 20 V or more at

5200 min

-1

(rpm)

KiSC issued 01, 2013 A

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 137 138

Sin comentarios

Wsm 05-E2B SERIES Especificaciones Pagina 90